Hypnotik FAQs
Power Usage
No, you cannot. While each individual channel is capable of handling up to 240W, the device has a strict total power quota of 360W shared across all outputs.
Think of it as a power budget: if you use 240W on a single channel, you only have 120W remaining (360W - 240W) to split among the other four channels. The combined total of all active channels must never exceed 360W.
Network
No. The Hypnotik FX is compatible only with 2.4GHz Wi-Fi networks. It does not support 5GHz bands.
Firmware Upgrade
Firmware Upgrade Overview
You can upgrade the firmware using one of two methods: Remote OTA (Automatic) or Manual OTA (File Upload).
Remote OTA is supported on Version 1.1.8 and later. If your device is on an older version, you must use the Manual OTA method.
- Remote OTA (Automatic): The device connects to the Hypnotik Cloud to check for updates. If a new version is found, the user simply clicks a button to approve and start the update.
- Manual OTA (File Upload): The user must manually download the firmware file to their computer/phone and then upload it to the controller via the Web UI.
Connection Requirements
- For Remote OTA: Yes. The device requires an active internet connection to communicate with the Hypnotik Cloud.
- For Manual OTA: No. You do not need an active internet connection on the controller itself, as the file is transferred locally.
- Remote OTA: No. You cannot perform a Remote update in AP mode because the device cannot reach the cloud.
- Manual OTA: Yes. You can perform a Manual update in AP mode because you are uploading the firmware file directly from your local device to the controller.
Please refer to the step-by-step instructions in our [Manual Update Guide]. You can perform manual update from phone too. [Manual Update Phone Guide].
Firmware Upgrade Steps
You can upgrade the firmware in the Hypnotik FX Controllers with the following guidelines:
- Step 1: Download Firmware Go to the Downloads section and download the latest firmware binary file to your computer.
- Step 2: Connect to Hypnotik AP Connect your computer to the Wi-Fi Access Point generated by the controller (Network Name: HYPNOTIK-XXXX).
- Step 3: Access the Portal A Captive Portal window should automatically open the Home page. If it does not, open your web browser and navigate to http://4.3.2.1.
- Step 4: Enter AP Mode Controls On the landing page, under the "AP Mode" section, click the "LED STRIP CONTROLS" button. This will take you directly to the Main Dashboard.
- Step 5: Navigate to Update Settings Once the dashboard loads, go to Settings and select the Security and Updates tab.
- Step 6: Load Firmware Select the Manual OTA option. Click Choose File and select the new binary file you downloaded in Step 1.
- Step 7: Trigger Upgrade Click the "UPDATE!" button. The update process will begin immediately. > Important: Do not close the browser tab or disconnect the device while the update is in progress.
- Step 8: Verification After the update is successful, the device will automatically reboot. Once the UI reloads, navigate to the Info page to verify that the new firmware version is active.
General
Hypnotik is a premium smart-lighting system designed specifically for Control4 integrators and lighting professionals. The lineup includes FX Controllers (such as the digital audio-reactive controller and the 5‑in‑1 controller), remotes (e.g., the 4‑Button + Raise/Lower remote), and a wide range of linear lighting products designed for both indoor and outdoor use.
Hypnotik lights offermillions of colors, along with tunable warm and cool whites that adapt to circadian rhythms—making them ideal for creating dynamic, mood-enhancing environments.
Yes! Hypnotik products have built-in support for Control4, using the Simple Device Discovery Protocol (SDDP) for seamless integration. Lighting can be adjusted through any Control4 interface, including touch panels and mobile apps.
- FX Digital Audio Reactive Controller: Syncs lighting effects to music—every beat creates dynamic visuals for a more immersive audio-visual experience.
- FX 5‑in‑1 Controller: Can control RGB, RGBW, CCT and white lighting, and is compatible with Vibe X4/X5 strips—offering flexibility in one device.
Absolutely! Hypnotik offers a dedicated4‑Button + Raise/Lower remote, which controls power, dimming, color selection, and white CCT remotely. It can be used standalone or mounted magnetically for easy access.
Hypnotik maintains an exclusive network of authorized dealers. Interested professionals (integrators, lighting designers) can apply via their "Dealer Application" on the site. Once approved, you’ll gain access to their products and support tailored to industry partners.